Transcription

Introduction1Safety notes2SITRANS FDescription3Electromagnetic flowmetersSITRANS FM MAG 5100 WInstalling/Mounting4Connecting5Service and maintenance6Diagnostics andTroubleshooting7Technical data8Product documentation andsupportAAppendixBCertificates and supportCOperating Instructions7ME6527ME65801/2020A5E03063678-AC

Legal informationWarning notice systemThis manual contains notices you have to observe in order to ensure your personal safety, as well as to preventdamage to property. The notices referring to your personal safety are highlighted in the manual by a safety alertsymbol, notices referring only to property damage have no safety alert symbol. These notices shown below aregraded according to the degree of danger.DANGERindicates that death or severe personal injury will result if proper precautions are not taken.WARNINGindicates that death or severe personal injury may result if proper precautions are not taken.CAUTIONindicates that minor personal injury can result if proper precautions are not taken.NOTICEindicates that property damage can result if proper precautions are not taken.If more than one degree of danger is present, the warning notice representing the highest degree of danger will beused. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to propertydamage.Qualified PersonnelThe product/system described in this documentation may be operated only by personnel qualified for the specifictask in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualifiedpersonnel are those who, based on their training and experience, are capable of identifying risks and avoidingpotential hazards when working with these products/systems.Proper use of Siemens productsNote the following:WARNINGSiemens products may only be used for the applications described in the catalog and in the relevant technicaldocumentation. If products and components from other manufacturers are used, these must be recommended orapproved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation andmaintenance are required to ensure that the products operate safely and without any problems. The permissibleambient conditions must be complied with. The information in the relevant documentation must be observed.TrademarksAll names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publicationmay be trademarks whose use by third parties for their own purposes could violate the rights of the owner.Disclaimer of LiabilityWe have reviewed the contents of this publication to ensure consistency with the hardware and software described.Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in thispublication is reviewed regularly and any necessary corrections are included in subsequent editions.Siemens AGDigital IndustriesPostfach 48 4890026 NÜRNBERGGERMANYDocument order number: A5E03063678 02/2020 Subject to changeCopyright Siemens AG 2020.All rights reserved

Table of contents12345Introduction.71.1Purpose of this documentation.71.2Document history .71.3Designated use .71.4Checking the consignment.71.5Items supplied .81.6Industrial use note.81.7Security information .81.8Transportation and storage .91.9Notes on warranty .9Safety notes.112.1Laws and directives.112.2Conformity with European directives.122.3Conformity with PED directive.122.4Installation in hazardous area .152.5Improper device modifications .162.62.6.12.6.2Custody transfer.16MI-001 .16PTB K7.2.17Description.193.1System components.193.2Design .203.3Theory of operation .20Installing/Mounting.234.1Installation safety precautions.234.2Determining a location .244.3Orienting the sensor.274.4Mounting .284.5Potential equalization .30Connecting .335.1Remote installation.345.2Installation check.37SITRANS FM MAG 5100 WOperating Instructions, 01/2020, A5E03063678-AC3

Table of contents678ABC45.3Potting .385.4Direct burial .39Service and maintenance .416.1Maintenance.416.2Verification .416.3Recalibration .436.4Technical support.436.5Transportation and storage .446.6Return procedure .446.7Disposal .45Diagnostics and Troubleshooting .477.1Sensor check .477.2Fluctuating process values.48Technical data .498.1MAG 5100 W.498.2Cable data.538.3Effect of temperature on working pressure .548.4Process fluid conductivity.558.5Liner selection .568.6Electrode selection.568.7Sizing tables.578.8Dimensions and weight .59Product documentation and support.65A.1Product documentation .65A.2Technical support.66Appendix.67B.1Measuring ranges .67B.2Measuring range according to EN1434 (2007) .69B.3Flange mating dimensions (metric) .70B.4Factory settings.76B.5Coil resistance.78Certificates and support.81C.1Product documentation .81C.2Technical support.82C.3QR code label .82SITRANS FM MAG 5100 WOperating Instructions, 01/2020, A5E03063678-AC

Table of contentsGlossary .83Index.85SITRANS FM MAG 5100 WOperating Instructions, 01/2020, A5E03063678-AC5

Table of contents6SITRANS FM MAG 5100 WOperating Instructions, 01/2020, A5E03063678-AC

1Introduction1.1Purpose of this documentationThese instructions contain all information required to commission and use the device. Read theinstructions carefully prior to installation and commissioning. In order to use the devicecorrectly, first review its principle of operation.The instructions are aimed at persons mechanically installing the device, connecting itelectronically, configuring the parameters and commissioning it, as well as service andmaintenance engineers.1.2Document historyThe contents of these instructions are regularly reviewed and corrections are included insubsequent editions. We welcome all suggestions for improvement.The following table shows the most important changes in the documentation compared to eachprevious edition.EditionRemarks01/2020Integration of JIS 10K in 7ME65209/2018Updated custody transfer05/2016 General upda